Hard Drive Inspector 3.99.441 Pro [Mengontrol Kinerja Harddisk] | 3 MB

Hard Drive Inspector is an easy-to-use program that monitors computer disks' health to prevent crashes and expensive hard disk recovery. The value of information stored on an average computer hard drive often exceeds the value of the computer itself. But a hard drive is one of the most unreliable internal computer devices. When it crashes (which happens quite frequently), the stored information will be lost fully or partially. Subsequent hard drive recovery is either not possible at all, or constitutes a very sophisticated and expensive procedure that can be performed only by specialists.

Modern hard drives support S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) that was specially developed to detect upcoming disk failures. Using this technology Hard Drive Inspector can monitor the current state of various life-critical parameters describing a disk's reliability and performance. Hard Drive Inspector analyzes this data and warns the user if the parameters indicate a critical reduction of disk reliability. Timely alerts make it possible to copy the data and replace an unreliable disk, thus preventing information loss and costly hard drive data recovery.

Minimum System Requirements

The computer on which you install Hard Drive Inspector should meet the following system requirements:

Operating system Windows 2000/XP/2003/Vista/2008/7.
About 10 MB of available disk space.
At least one
ATA-compatible (PATA/SATA/eSATA) hard drive or
SCSI hard drive or
Solid state drive (SSD).

Additional hardware that is supported by Hard Drive Inspector

The hard drives that are connected to the 3Ware 8xxx and 9xxx Series RAID controllers. Hard Drive Inspector doesn't support the other RAID controllers.
USB disks based on Cypress AT2 chips (USB to ATA/ATAPI bridge) are supported. Below is an incomplete list of the supported USB drives and enclosures:
1) Transcend StoreJet 3.5 TS0GSJ35, StoreJet 2.5 TS0GSJ25;
2) Western Digital Passport Portable Hard Drives;
3) Thermaltake Muse A2291, A2292, A2293, A2294, A2295, A2296;
4) AgeStar MR3K1F, IUB3A-SO, IUB3A-BK, IUB2O1, IUB2A;
5) DelronTech U00830-525NS, U00830-35MA1, FU9183A-25DS, U00830-25DS;
6) ArrowMicro PM-526U2-ACS, PM-525U2-ACB;
7) Sarotech FCD-524U2;
8) Iomega USB 2.0 external hard drives;
9) Conceptronic Grab'n'Go 3.5 Hard Disk USB 2.0 (CHD3UL), Grab'n'Go 2.5 Hard Disk USB 2.0 (CHD2UL), USB 2.0 storage box 5.25 (CID525U);
10) OmegaTech UHD211, UHD213, UHD221, UHD225, UHD231, UHD233, UHD234, UHD235, UHD251, UHD253, UHD255;
11) Lacie Rugged All-Terrain Hard Drive, Skwarim, Brick Mobile Hard Drive, Mobile Hard Drive, Design by F.A. Porsche, Mobile Drive;
12) Gembird FD2-UF2;
13) Mad Dog Multimedia MegaVAULT 3.5; MegaVAULT 2.5.

I-O DATA USB disks of HDH-SUE, HDH-SU, HDH-UEH, HDC-U, HDP-U, HDPX-SU, HDMX-SU, HDH-U, HDH-US, HDH-U, HDPX-U, HDMX-U series.
USB/eSATA disks based on JMicron 20336/20337/20338/20339 etc. chips (USB to SATA bridges) are supported. Below is an incomplete list of the supported drives and enclosures:
1) Age Star SCB2A1/SUB2A1/SUB201/SCBT.
2) Vantec EZ Swap EX MRK-250ST/CB-ISATAU2.
3) AixCase AIX-ESU35CD/AIX-SUB3A1.
4) TrekStor DataStation.
5) Fibrionic PE-3264.
6) ST-Lab S190.
7) SPIRE HandyBook.

Fujitsu HandyDrive USB disks.
Quick Tech Solutions USB storage adapters.
Maxtor OneTouch 4/Mini/Basics Portable drives.
Western Digital Elements Desktop and WDE1UBK drives.
Initio external drives.
Lacie hard disk Neil Poulton design drives.
Seagate FreeAgent Desk drives.
Toshiba PX1396E-3T01 drives.
USB/eSATA disks based on SunPlus Innovation Technologies Inc. chips are supported.